| Management number | 250053937 | Release Date | 2026/09/17 | List Price | US$2.60 | Model Number | 250053937 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Features: 1. Working voltage:wide voltage 5 ~ 30V, With a relay indicator. 2. Operating mode:the initial state, module outputs: normally open (NO) and the common terminal (COM) is disconnected, normally closed (NC) and the common terminal (COM) connected. Providing a low pulse signal, or touch trigger key, relay and indicator lights, the output of the state: normally open (NO) and Common (COM) connected, normally closed (NC) and the common terminal (COM) is disconnected. After 0-24 seconds (this time can be adjusted according to your needs) relay off, back to the state before the trigger. 3.The length of timing adjustment by potentiometer, default 0-24 seconds. If you need more time, you can replace the larger capacitor (C2) or potentiometer. Delay time T = 1.1RC. For example: 22uf capacitor and resistor 1M, then T = 1.1 * 0.000022 * 1000000 = 24.2 seconds. 4. The module can control: 10A / 250VAC, 10A / 30VDC load. 5. The relay has a freewheeling protection. 6. Trigger signal input terminal is designed with a pull and filter circuit, enhanced anti-jamming capability, suitable for industrial control. Many manufacturers add the optocoupler isolation, but there is no separation between module's ground and signal's ground, would not achieve the interference effect. After the test found that only enhance the stability of the signal input port to interference, regardless of this module is under electromagnetic interference environment, or in the power-up and power-down moment, the relay will not produce misoperation . 7. Dimensions: 5.4 * 1.9 * 1.8cm (L * W * H) Applications: 1. Burglar, alarm, building delay switch, sound and light control light switch. 2. Delay powered vehicle equipment, to prevent large currents generated as the car starts burning vehicle equipment. Package included: 2* 5V -30V Delay Time Relay Control Switch Module
| ASIN | B0832MW9L4 |
|---|---|
| Wattage | 300 watts |
| Brand Name | HiLetgo |
| Unit Count | 2 Count |
| Coil Voltage | 30 volts |
| Contact Type | 2no 2nc |
| Manufacturer | HiLetgo |
| Mounting Type | Surface Mount |
| Connector Type | Plug-in (Microusb), Na |
| Current Rating | 10 A |
| Operating Time | 24 seconds |
| Operation Mode | Off |
| Number of Items | 2 |
| Number of Packs | 2 |
| Number of Terminals | 2 |
| Contact Current Rating | 10 A |
| Maximum Switching Current | 10 A |
| Maximum Switching Voltage | 30 volts |
| Minimum Switching Voltage | 5 volts |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form