Ethernet Cable Tracker LAN Network Cables Tester Multifunction Line Finder Measure for CAT5 CAT6 RJ45 RJ11 with Network Maintenance Collage Telephone Line Test Earphones for Cable Collage

Handheld Ethernet network cable tester is suitable for RJ11, RJ45, and other metal wires can be found through the transmitter. the work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.the line detection is on the line of the open, shorted, wrong, reverse the physical connection detection. Rapidly find the target wire. 【Package Content】 : 1 x Transmitter, 1 x Receiver,1 xCrocodile clip conversion interface ,1 x Earphone, 1 x RJ11 Converter Interface, 1 x RJ45 Converter Interface, 1 x User Manual，1 x Black Bag, (Without battery )

• The versatile handheld ethernet network cable tester. Multifunction Wire tracker：The Line Finder can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip; In this situation, the wires must be in power-off status, otherwise the units will be damaged; It is recommended to stripe down some of the wires when connecting through the clip; Select "SCAN"; Emitter works properly if the "SCAN" indicator is on; Use the receiver to find target wires.
• Telephone network Line test : The Line Finder testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection; Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; Adjust the volume of receiver by pressing the volume rotary knob.
• Wire tracking multifunction：Find wire on all types of connected operating Ethernet switch Router、PC terminal. Perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)，Fast to locate the breakpoint without wire's cover damage；And also with the Battery（10V-110V） positive and negative measurements function.
• Earphones designing: With a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment, Adjust the volume knob to make the volume proper and avoid being interfered. Notice that if the sound is low, you should check whether the battery is powered off or not, and the LED flashlight allows operation in dark situation.
• You will get: 1 x Transmitter, 1 x Receiver,1 xCrocodile clip conversion interface ,1 x Earphone, 1 x RJ11 Converter Interface, 1 x RJ45 Converter Interface, 1 x User Manual，1 x Black Bag, (Without battery )