Dreyoo 2 Pcs Pressure Sensor Replacements for Electric Pressure Cookers

Is your pressure cooker beeping with error codes C6, C6L, and C6H, E4 Error. Follow this guide to diagnose what is wrong and learn how to fix it. Step 1: turn the pressure cooker upside down. Use a screwdriver to remove the screws securing the bottom plate. Step 2: unplug the 3 plugs: higher level cable, lower level cable and black plug. Step 3: remove the sensor fixing screw with a screwdriver. Lift the sensor assembly out of the recess. And install a new replacement pressure sensor replacement. The sensor replacement is the good way to save your pressure cooker. If your pressure cooker has this kind of failure, do not hesitate to buy it with confidence. If you are worried that it will not be installed, do not worry, we have detailed installation steps. Anyone can easily change accessories. Warm note The brands related above are only for purposes of demonstrating compatibility, not use as trademarks, our trademark is Dreyoo.

• Compatibility: the pressure sensor replacement is compatible with Instant Pot/Power Cooker/ compatible with Cuisinart/ Power Quick Pot/Farberware /Gourmia/Mueller/Gowise/Cosori/Mealthy/Zavor/Ninja/ Yedi/PressurePro; The pressure sensor replacement is a universal accessory, almost other brands can be applied, and you can open the bottom of the pressure cooker to confirm before buying
• Error Codes: If the LEDs are blinking with error codes C6, C6L, C6H and E4 errors, the pressure sensor is faulty; Most of the time, this is due to buildup on the sensor contacts; Cleaning the contacts may solve the problem; If the problem still cannot be solved, it is time to replace the new pressure sensor; For specific installation steps, please refer to the attached installation manual
• How to Test New Pressure Sensor Replacement: fill a pressure cooker with 3 cups of water and set it to high pressure for 5 minutes; If the emergency vent starts leaking or venting during the heat cycle, the pot is over pressurized; Immediately unplug and quick release; After 5 minutes, use the quick release to vent; There should be a strong pressure release; If not, the pressure cooker is not reaching enough pressure
• Quality Pressure Sensor: it provides an effective way to solve the problem of the pressure cooker not working, no need to buy a new pressure cooker
• Package Content: you will receive 2 pieces of pressure sensor replacements; Pressure sensor is a consumable, a combination of 2 pieces, which can meet the needs of long term use