220V Single-Phase Motor Soft Starter Module controller2KW4KW6KW8KW Motor Online Soft Starting Fan Pump Pressure Reducer Conveyor (SSR-20WA-R2(1.0KW))

R1 only has soft start, while R2 has both slow stop and slow start. This product is commonly used for motors with the following voltages: 220V.(50Hz,60Hz). 230V.(50Hz,60Hz). 240V.(50Hz,60Hz). The above three voltages are universal for this product. Single-phase 220V soft start module use range: Petroleum,chemical,fire,construction,metallurgy,building materials,mining,environmental protection and other fields. Fans,pumps,belt conveyors,ball mills,car washing machines,conveyors and compressors. It is an ideal replacement for traditional star/delta conversion,auto-coupling buck,magnetic control buck,inverter and other step-down starting devices. 220V single-phase motor soft start module(motor conversion method) model: SSR-20WA-R1(1kw) SSR-40WA-R1(1.5kw) SSR-60WA-R1(2kw) SSR-100WA-R1(4kw) SSR-150WA-R1(6kw) SSR-200WA-R1(8kw) According to the actual working current 5 times:power÷voltage×5 in case: Your motor is 8000w power÷220v voltage ×5=(181.81WA should choose 200WA)should choose the parameter closest to that model. our soft start is universal for the motor,regardless of whether the motor has a capacitor or not. If your motor is working for a long time,the motor above 2000W needs to be equipped with a heat sink. Single phase motor compared to starter module Voltage compatibility: (220V+0V=single-phase 220V,AC) (230V+0V=single-phase 230V,AC) (240V+0V=single-phase 240V,AC) (220V+220V=two-phase 380V-400V,AC) Frequency:50Hz,60Hz Soft start time is adjustable between 0-30 seconds (soft start time refers to the entire process 0-220V,0-380V) Slowly adjust the starting voltage from 0-50?Reaching the rated voltage (220-380V) There are two ways to use it: 1.After closing the switch,the main power will be energized and start soft start. 2.Use the switch to control,close the soft start to start,open to stop. The soft start module has 2 programs: 1.SSR-40WA-R1 has soft start and no soft stop. 2.SSR-40WA-R2 h 1. During installation, it is necessary to ensure that the contact surface between the heat sink and this product is smooth and clean. Then, apply a layer of thermal conductive silicone grease evenly on the surface. Finally, symmetrically tighten and fix the screws with flat washers and spring washers. 2. After the solid-state relay stops working for the first time, it is recommended to tighten the fixing screws again while it is still warm to ensure that the bottom plate of the solid-state relay and the surface of the heat sink can make a close contact, achieving the ideal heat dissipation effect. 3. The rated current of different models of solid-state relays is the rated current at an environmental temperature of 40℃. Therefore, sufficient heat dissipation is necessary!!

• Single-phase 220V soft start module use range:
• Petroleum,chemical,fire,construction,metallurgy,building materials,mining,environmental protection and other fields.
• Fans,pumps,belt conveyors,ball mills,car washing machines,conveyors and compressors.
• It is an ideal replacement for traditional star/delta conversion,auto-coupling buck,magnetic control buck,inverter and other step-down starting devices.